FlexSEA Wiki

A WEARABLE ROBOTICS TOOLKIT

User Tools

Site Tools


faq

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
faq [2018/09/18 16:50]
jfduval [Eclipse can't use the STLink]
faq [2018/09/18 16:51] (current)
jfduval [Strange behavior after programming a microcontroller]
Line 44: Line 44:
 ==== Strange behavior after programming a microcontroller ==== ==== Strange behavior after programming a microcontroller ====
 The I2C bus can lock-up during programming. Always power cycle after programming. The I2C bus can lock-up during programming. Always power cycle after programming.
 +Please note that having a USB cable connected will prevent a full power cycle! Always disconnect USB when you want to power cycle.
  
 ==== I programmed the board, but my LEDs are not blinking. ==== ==== I programmed the board, but my LEDs are not blinking. ====
faq.txt ยท Last modified: 2018/09/18 16:51 by jfduval