FlexSEA Wiki

A WEARABLE ROBOTICS TOOLKIT

User Tools

Site Tools


fx-rigid-mn

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
fx-rigid-mn [2018/03/20 22:11]
jfduval
fx-rigid-mn [2018/03/20 22:12] (current)
jfduval
Line 1: Line 1:
 ====== Compile fx-rigid-mn for your project ====== ====== Compile fx-rigid-mn for your project ======
  
-First of all, make sure to [[sourcecode|properly clone the project with its submodules]]. Unless you are a Dephy employee, use the '​public'​ branch. The same code base is used by many projects, many different circuits, and many different versions of these circuits. Only one source file needs to be changed to select the active project (and its configuration,​ if necessary). The rest of the options will be selected with pre-processor directives.+First of all, make sure to [[sourcecode|properly clone the project with its submodules]]. Unless you are a Dephy employee, use the '​public'​ branch ​(git clone --recursive -b public https://​github.com/​DephyInc/​fx-rigid-mn.git). The same code base is used by many projects, many different circuits, and many different versions of these circuits. Only one source file needs to be changed to select the active project (and its configuration,​ if necessary). The rest of the options will be selected with pre-processor directives.
  
 ===== 1) Select the Active Project ===== ===== 1) Select the Active Project =====
fx-rigid-mn.txt ยท Last modified: 2018/03/20 22:12 by jfduval