FlexSEA Wiki

A WEARABLE ROBOTICS TOOLKIT

User Tools

Site Tools


fxdevicefields

This is an old revision of the document!


FlexSEA Device Field IDs

The following table contains the Field IDs used for variables to stream from a FlexSEA device. These are defined in the C/C++ Header file: fx_device_defs.h

Name Value Description
FX_RIGID_DEVTYPE 0 Device Type
FX_RIGID_DEVTID 1 Device TID
FX_RIGID_STATETIME 2 Timestamp
FX_RIGID_ACCELX 3 X-axis Acceleration
FX_RIGID_ACCELY 4 Y-axis Acceleration
FX_RIGID_ACCELZ 5 Z-axis Acceleration
FX_RIGID_GYROX 6 X-axis Gyroscope
FX_RIGID_GYROY 7 Y-axis Gyroscope
FX_RIGID_GYROZ 8 Z-axis Gyroscope
FX_RIGID_ENC_ANG 9 Encoder Angle
FX_RIGID_ENC_VEL 10 Encoder Velocity
FX_RIGID_ENC_ACC 11 Encoder Acceleration
FX_RIGID_MOT_CURR 12 Motor Current
FX_RIGID_MOT_VOLT 13 Motor Voltage
FX_RIGID_BATT_VOLT 14 Battery Voltage
FX_RIGID_BATT_CURR 15 Battery Current
FX_RIGID_BATT_TEMP 16 Battery Temperature
FX_RIGID_BATT_STATUS 17 Battery Status
FX_RIGID_GEN_VAR_BASE 18
FX_RIGID_GEN_VAR_0 (FX_RIGID_GEN_VAR_BASE + 0)
FX_RIGID_GEN_VAR_1 (FX_RIGID_GEN_VAR_BASE + 1)
FX_RIGID_GEN_VAR_2 (FX_RIGID_GEN_VAR_BASE + 2)
FX_RIGID_GEN_VAR_3 (FX_RIGID_GEN_VAR_BASE + 3)
FX_RIGID_GEN_VAR_4 (FX_RIGID_GEN_VAR_BASE + 4)
FX_RIGID_GEN_VAR_5 (FX_RIGID_GEN_VAR_BASE + 5)
FX_RIGID_GEN_VAR_6 (FX_RIGID_GEN_VAR_BASE + 6)
FX_RIGID_GEN_VAR_7 (FX_RIGID_GEN_VAR_BASE + 7)
FX_RIGID_GEN_VAR_8 (FX_RIGID_GEN_VAR_BASE + 8)
FX_RIGID_GEN_VAR_9 (FX_RIGID_GEN_VAR_BASE + 9)
fxdevicefields.1542653657.txt.gz · Last modified: 2018/11/19 18:54 by dtscbs