FlexSEA Wiki

A WEARABLE ROBOTICS TOOLKIT

User Tools

Site Tools


led

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
led [2019/01/14 17:56]
jfduval [For Regulate/Battery:]
led [2019/01/21 13:19] (current)
jfduval [For Regulate/Battery:]
Line 20: Line 20:
   * If errors are detected, it will blink red. As soon as the pushbutton is released the circuit will power off.   * If errors are detected, it will blink red. As soon as the pushbutton is released the circuit will power off.
   * During normal operation it will be green or aqua, fading in and out every second   * During normal operation it will be green or aqua, fading in and out every second
 +  * A brief press will turn the LED magenta as a confirmation that the software has registered the user input. This can be used to start experiment or to switch mode or control policies.
   * If the pushbutton is pressed, the led will start fading red.    * If the pushbutton is pressed, the led will start fading red. 
     * If released before it starts blinking, the board will revert to the previous operating mode.     * If released before it starts blinking, the board will revert to the previous operating mode.
led.txt ยท Last modified: 2019/01/21 13:19 by jfduval