FlexSEA Wiki

A WEARABLE ROBOTICS TOOLKIT

User Tools

Site Tools


pythonscripts2

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
pythonscripts2 [2019/02/14 15:40]
flabelle
pythonscripts2 [2019/09/09 21:26] (current)
mmurray [Quick Start]
Line 23: Line 23:
     * For Linux, copy release/​linux/​libfx_plan_stack.so to fx_plan_stack/​build/​unix ​ -- (sorry, not released yet!)     * For Linux, copy release/​linux/​libfx_plan_stack.so to fx_plan_stack/​build/​unix ​ -- (sorry, not released yet!)
   - In a text editor:   - In a text editor:
 +    - Duplicate flexseapython/​com_template.txt to a file named flexseapython/​com.txt
 +    - If connecting over USB or Bluetooth you can ignore the first line which is the baud rate, but if connecting to an actual serial port please enter the actual baud rate you would like to use
     - Open flexseapython/​com.txt and configure the correct ports (ex.: COM5 or /​dev/​ttyACM0)     - Open flexseapython/​com.txt and configure the correct ports (ex.: COM5 or /​dev/​ttyACM0)
     - If you have more than one device, use one line per COM port     - If you have more than one device, use one line per COM port
pythonscripts2.txt ยท Last modified: 2019/09/09 21:26 by mmurray