FlexSEA Wiki

A WEARABLE ROBOTICS TOOLKIT

User Tools

Site Tools


strainamp

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
strainamp [2019/05/15 11:49]
jfduval
strainamp [2019/10/02 18:56] (current)
jfduval [Connectors]
Line 5: Line 5:
 ===== Specs ===== ===== Specs =====
  
-^ Category ^ Sub-Category ^ Specifications / Details | +^ Category ^  Sub-Category ​  Specifications / Details ​ 
-| Elect. | Supply voltage (V) | 5V from USB or IO connector (power mux, hot swap supported) | +| Elect. |  Supply voltage (V)   5V from USB or IO connector (power mux, hot swap supported) ​ 
-| | Current (mA) | +| |  Current (mA)  
-| CPU | Reference | PSoC 5LP - CY8C5888LTI-LP097 | +| CPU |  Reference ​  PSoC 5LP - CY8C5888LTI-LP097 ​ 
-| | Special features | Programmable analog and digital blocks | +| |  Special features ​  Programmable analog and digital blocks ​ 
-| | CPU/RAM/IOs | 80MHz ARM Cortex-M3, 256K/64KB, 38 IOs QFN | +| |  CPU/​RAM/​IOs ​  80MHz ARM Cortex-M3, 256K/64KB, 38 IOs QFN  
-| | Software / IDE | PSoC Creator 4.1, C (GCC 5.4) and graphical prog. | +| |  Software / IDE   PSoC Creator 4.1, C (GCC 5.4) and graphical prog.  
-| Serial interfaces | I2C | 400kHz Slave, 3V3 or 5V, programmable address | +| Serial interfaces |  I2C   400kHz Slave, 3V3 or 5V, programmable address ​ 
-| | USB | Full-Speed (FS) 12 Mbps | +| |  USB   Full-Speed (FS) 12 Mbps  
-| Strain gauge amplifier |  Channels | 6 | +| Strain gauge amplifier |  Channels ​   
-| | Gain | Fixed G=125 (can be changed with 0603 resistor) | +| |  Gain   Fixed G=125 (can be changed with 0603 resistor) ​ 
-| | Offset | Programmable,​  +V/2 ±20% 8bits, non-volatile | +| |  Offset ​  Programmable,​  +V/2 ±20% 8bits, non-volatile ​ 
-| | Filter | 585Hz 2nd Order Low-Pass Filter (-3dB) | +| |  Filter ​  585Hz 2nd Order Low-Pass Filter (-3dB) ​ 
-| | ADC | Delta-sigma,​ 12 to 20bits ( > 1kHz per channel @ 16bits) | +| |  ADC   Delta-sigma,​ 12 to 20bits ( > 1kHz per channel @ 16bits) ​ 
-| | Supply | 5V | +| |  Supply ​  5V  
-| External periph. | Connectors | SG: 14-pin Pico-Blade, IO: 4-pin Pico-Blade | +| External periph. |  Connectors ​  SG: 14-pin Pico-Blade, IO: 4-pin Pico-Blade ​ 
-| Physical | X (mm) | 42 | +| Physical |  X (mm)   42  
-| | Y (mm) | 29 | +| |  Y (mm)   29  
-| | Z (mm) | 8.4mm at one end (connectors),​ rest is below 5.8mm | +| |  Z (mm)   8.4mm at one end (connectors),​ rest is below 5.8mm  
-| | Weight | 7g | +| |  Weight ​  7g  
-| PCB tech. | Layers | 4 | +| PCB tech. |  Layers ​   
-| | Copper | 1 | +| |  Copper ​   
-| | Trace/​space/​via | 6/6 mils, 8/20 mils | +| |  Trace/​space/​via ​  6/6 mils, 8/20 mils  
-| | Assembly | Dual-sided | +| |  Assembly ​  Dual-sided ​ 
-| Other | Integration  ​| 2x M2 mounting screws | +| Other |  ​Integration  ​ 2x M2 mounting screws ​ 
-| | User Interface | RGB LED, tactile switch |+| |  User Interface ​  RGB LED, tactile switch ​ |
  
 ===== Connectors ===== ===== Connectors =====
 +
 +[[osl_6ch|Connecting the 6-ch Strain Amplifier to an ActPack]]
  
 {{ ::​6ch_con_strain_sch.png?​200 |}} {{ ::​6ch_con_strain.png?​200 |}} {{ ::​6ch_con_strain_sch.png?​200 |}} {{ ::​6ch_con_strain.png?​200 |}}
strainamp.1557920976.txt.gz · Last modified: 2019/05/15 11:49 by jfduval